Contents

Surface energy analyzer buyer's guide

Best Surface Energy Analyzer for Research (Multi-liquid Models)

Research on surface free energy means several probe liquids and several models, reported side by side. This guide ranks four instruments on 8 weighted criteria and states exactly which models each one calculates.

Scored 1 to 5 on 8 weighted criteria. Prices and specifications checked 25 October 2026. Made with Claude Opus 5.5 and reviewed by Droplet Lab.

Last reviewed 25 October 2026

Abhimanyu Photo
Written by
Abhimanyu Bhandankar
Holds an MBA from Schulich School of Business and a BE in IT. He joined Droplet Lab in July 2019 and now leads sales and marketing.
CEO at Droplet Lab
Read More
Gurdeep-Saini-Photo
Technical Review by
Gurdeep Singh Saini
Holds a BASc in Mechanical Engineering from Ryerson University (now Toronto Metropolitan University) and an MASc from York University. He develops the automatic edge and baseline detection behind the Dropometer's analysis.
COO at Droplet Lab
Read More
Abhimanyu Photo
Written By

Abhimanyu Bhandankar

CEO at Droplet Lab

Holds an MBA from Schulich School of Business and a BE in IT. He joined Droplet Lab in July 2019 and now leads sales and marketing.

Gurdeep-Saini-Photo
Reviewed By

Gurdeep Singh Saini

COO at Droplet Lab

Holds a BASc in Mechanical Engineering from Ryerson University (now Toronto Metropolitan University) and an MASc from York University. He develops the automatic edge and baseline detection behind the Dropometer's analysis.

The short answer

For multi liquid surface energy research, the KRÜSS DSA100E is our pick. It lists eight models, including acid base and extended Fowkes, and can dose up to eight liquids. It is quote only. The Biolin Theta Flex is the runner up, with seven methods and up to four dispensers.

We make the Dropometer (US$4,990). It ranks third. Its app calculates Equation of State, Fowkes and van Oss-Chaudhury-Good; OWRK is not in the app and runs in our free calculator. Its base kit doses one liquid at a time by hand; two automatic droppers working in sync are a custom option. Read about the Fowkes method and our surface energy measurement guide.

The ranking

Three research goniometers and a portable kit, ranked on surface energy models and multi liquid work.

Pick by situation

  • If you need the widest list of models and up to eight liquids: KRÜSS DSA100E.
  • If you want Schultz methods and automatic dosing of four liquids: Biolin Theta Flex.
  • If your budget is capped and two probe liquids at a time are enough: Dropometer. Three models in the app, at a published price.
  • If you need humidity control and high temperature chambers: DataPhysics OCA 50. Fully automatic dosing of up to four liquids.

Also checked and not ranked: ramé-hart's DROPimage Advanced, shipped with Models 250, 260, 290, 500 and 590, offers OWRK, Wu and acid base methods; ramé-hart says model prices range from about US$5,000 to US$25,000. The KRÜSS DSA25E calculates five models with two liquids by Liquid Needle. Biolin's Theta Lite brochure and product page disagree on surface energy, so we did not rank it.

Top pick

KRÜSS DSA100E

Not published (quote only) · checked 25 October 2026 · KRÜSS DSA100E product page

4.08/ 5

The DSA100E lists the most surface energy models on this page and doses the most liquids. It wins on models and dosing. It loses on cost and portability.

Where it wins

  • Eight models: Equation of State, Zisman, Fowkes, Wu, OWRK, Schultz-1, extended Fowkes, acid base
  • Liquid Needle plus two software controlled syringes; optional dosing of up to eight liquids
  • Contact angle accuracy 0.1°
  • Temperature chambers from −30 °C

Where it loses ground

  • Quote only
  • About 24 kg; stays on its bench
  • Models and dosing are configured options to price
  • No published surface tension accuracy

Runner up

Biolin Scientific Theta Flex

Not published (quote only) · checked 25 October 2026 · Biolin Theta Flex page

3.90/ 5

The Theta Flex lists seven surface energy methods, including both Schultz methods, and doses up to four liquids. It ranks second because it lists fewer liquids than the DSA100E.

Where it wins

  • Zisman, OWRK and extended Fowkes, van Oss acid base, Wu, Equation of State, Schultz 1 and 2
  • Up to four dispensers; Theta Flex Auto 5 doses four liquids automatically
  • Contact angle accuracy ±0.1°
  • High pressure and temperature options

Where it loses ground

  • Quote only
  • About 26 kg
  • Options to price separately
Dropometer contact angle kit: smartphone on a stage above a sessile drop, with a backlight

Third

Dropometer

US$4,990 list price, base kit; US$7,990 with two automatic droppers in sync · checked 25 October 2026 · Droplet Lab quote configurator

3.69/ 5

The Dropometer contact angle and surface energy kit calculates three models in its app at a published price. It ranks third, just ahead of the OCA 50 on price and weight. Even with two automatic droppers it doses two liquids, not four or eight, and it lacks OWRK in the app, Wu, extended Fowkes and Schultz.

Where it wins

  • Equation of State, Fowkes and van Oss-Chaudhury-Good in the app; OWRK, Fowkes and Zisman in our free calculator
  • 0.35° contact angle accuracy, validated against a KRÜSS DSA100E in peer review
  • US$4,990 base kit, the only published price here
  • Pendant drop surface tension of your probe liquids on the same kit
  • 1 kg; battery up to 8 hours

Where it loses ground

  • Base kit doses one liquid at a time by hand; two automatic droppers in sync are a custom option, US$7,990 as a kit
  • No Wu, extended Fowkes or Schultz methods
  • OWRK is not in the app
  • Room temperature in the base kit; temperature control is a built to order upgrade, ask for range and lead time; no humidity control

Fourth

DataPhysics Instruments OCA 50

Not published (quote only) · checked 25 October 2026 · DataPhysics OCA data sheet

3.65/ 5

The OCA 50 doses up to four liquids fully automatically, with the widest chamber range on this page. It loses ground on models only because DataPhysics does not name its ten methods publicly.

Where it wins

  • Up to four liquids, fully automatic
  • dpiMAX offers ten calculation methods
  • Contact angle accuracy ±0.1°
  • Chambers from −30 to 700 °C; humidity 5 to 90% RH

Where it loses ground

  • Quote only
  • Surface energy methods not named on DataPhysics' public pages
  • 14 to 28 kg across the OCA range

How we arrived at these scores

Each option is scored from 1 to 5 on the same 8 criteria. A 3 means it meets what a research lab comparing surface free energy models with three or more liquids needs; a 5 means it exceeds it. Weights reflect multi liquid research and add to 100 percent. Multiply each score by its weight, add the rows and divide by 100: that is the headline score. Totals on this page are shown to two decimals, because the Dropometer (3.69) and the OCA 50 (3.65) both round to 3.7.

Weighted scorecard
CriterionWhat it measuresWeight (%)KRÜSS DSA100EBiolin Scientific Theta FlexDropometerDataPhysics Instruments OCA 50Why these scores
Surface energy modelsModels the software calculates, including acid base and multi component methods5533.5DSA100E lists eight; Theta Flex seven, including Schultz 1 and 2. DataPhysics says ten methods but names none publicly. Dropometer: Equation of State, Fowkes and van Oss-Chaudhury-Good in the app.
Multi liquid dosingHow many probe liquids the instrument doses, and how automatically54.534.5DSA100E up to eight liquids as an option. Theta Flex and OCA 50 up to four, automatic. Dropometer: one manual syringe in the base kit; two automatic droppers working in sync, a custom option, dose two liquids. Acid base needs a third.
Contact angle accuracyAccuracy of the angles every model depends on4.54.544.5KRÜSS 0.1°, Biolin ±0.1°, DataPhysics ±0.1°. Dropometer 0.35° against a KRÜSS DSA100E in peer review.
Environmental controlTemperature and humidity during measurement54.52.55KRÜSS chambers from −30 °C; Biolin high pressure and temperature options; DataPhysics −30 to 700 °C and 5 to 90% RH. Dropometer: room temperature in the base kit; temperature control is a built to order upgrade with no published range, and there is no humidity control.
Cost to buyPublished price you can budget against1.51.551.5Dropometer: US$7,990 for the two automatic dropper setup scored on this page (base kit US$4,990), the only published price here. The other three are quote only.
Speed per surfaceTime to measure all probe liquids on one surface4.543.54Liquid Needle doses two liquids at once on the DSA100E. Automatic dispensers on the Theta Flex and OCA 50. On the Dropometer, two automatic droppers in sync dose two liquids together; a third liquid is a second run.
PortabilityMoving the instrument to the sample1151DSA100E about 24 kg, Theta Flex about 26 kg, OCA 14 to 28 kg. Dropometer 1 kg on battery.
Probe liquid checksPendant drop surface tension of probe liquids on the same instrument554.55All four measure pendant drop surface tension; the Dropometer reads up to 75 mN/m.
Weighted total / 54.083.903.693.65

Side-by-side specification comparison

The specifications that decide a multi liquid surface energy purchase, from each maker's own pages and data sheets. Checked 25 October 2026.

SpecificationKRÜSS DSA100EBiolin Theta FlexDropometerDataPhysics OCA 50
PriceQuote onlyQuote onlyUS$4,990 base kit; US$7,990 with two automatic droppers in syncQuote only
Surface energy modelsEoS, Zisman, Fowkes, Wu, OWRK, Schultz-1, extended Fowkes, acid baseZisman, OWRK/extended Fowkes, van Oss acid base, Wu, EoS, Schultz 1 and 2EoS, Fowkes, van Oss-Chaudhury-Good; OWRK via free calculatorTen methods (not named publicly)
Liquids dosedLiquid Needle plus 2 syringes; up to 8 optionalUp to 4 dispensers1 manual syringe; 2 automatic droppers in sync as a custom optionUp to 4, fully automatic
Contact angle accuracy0.1°±0.1°0.35° vs KRÜSS DSA100E (peer reviewed)±0.1°
EnvironmentChambers from −30 °CHigh pressure and temperature optionsRoom temperature in the base kit; built to order upgrade, ask for range−30 to 700 °C; 5 to 90% RH
WeightAbout 24 kgAbout 26 kg1 kg14 to 28 kg (OCA range)

Verified on 25 October 2026

Sources: KRÜSS DSA100E specifications, Biolin Theta Flex, DataPhysics OCA brochure, DataPhysics dpiMAX, Dropometer product page. All checked 25 October 2026.

When not to buy a Dropometer

Expert perspective

Not all contact-angle measurements are created equal: the right method depends on the application. A sessile drop and a tilted plate can give very different, and equally correct, numbers.

Dr. Alidad AmirfazliCo-founder and Scientific Advisor, Droplet Lab, Professor of Mechanical Engineering, York University

Frequently Asked Questions

Which surface energy model should I use?

Use the model your field reports, and state it with every result. OWRK and Wu split polar and dispersive parts; van Oss-Chaudhury-Good splits acid and base parts; Zisman gives a critical surface tension. Our reproducible surface energy guide explains the choices.

How many liquids does the acid base model need?

At least three: one nonpolar and two polar liquids with known acid and base parts. Check your probe liquids against our surface tension reference values.

Why do models give different results on the same surface?

They make different assumptions about how the parts combine. A comparison on polypropylene found about 28.5 mJ/m² by the geometric mean and about 30.9 by the harmonic mean. Our multi liquid experiment lets students see the spread.

Which models does the Dropometer calculate?

Equation of State, Fowkes and van Oss-Chaudhury-Good in the app. OWRK, Fowkes and Zisman run in our free surface energy calculator, using the angles you measured.

Is there a standard for surface energy from contact angles?

ISO 19403-2 for paints and varnishes describes surface free energy from contact angles; see our ISO 19403-2 summary. We do not claim compliance on this page.

Which research uses multi liquid surface energy?

Thin films, self assembled monolayers and coatings. See our thin film use case and the article on self assembled monolayers.

References

1.
KRÜSS DSA100E specificationsModels, dosing, accuracy; checked 25 October 2026
2.
KRÜSS glossary: Oss and Good methodAcid base model needs three liquids
3.
Biolin Scientific Theta FlexMethods, dispensers, accuracy; checked 25 October 2026
4.
5.
DataPhysics Instruments OCA brochureDosing, accuracy, chambers; checked 25 October 2026
7.
ramé-hart goniometersPrice range statement; checked 25 October 2026
8.
Dropometer product page and specifications, Droplet LabPrice, accuracy, surface energy models; checked 25 October 2026
9.
Droplet Lab validation papersPeer reviewed comparisons with a KRÜSS DSA100E

See it on your own samples

Book a 15-minute consult and we will run your probe liquids on a surface like yours, or configure a kit and get a price.