Contents

Surface tension tensiometer buyer's guide

Best Tensiometer for Production QC

Production QC needs a surface tension reading you can act on before the batch moves on. This guide ranks three tensiometers, one per maker, for inks, coatings, cleaning baths and formulations on 9 weighted criteria.

Scored 1 to 5 on 9 weighted criteria. Prices and specifications checked 25 October 2026. Made with Claude Opus 5.5 and reviewed by Droplet Lab.

Last reviewed 25 October 2026

Abhimanyu Photo
Written by
Abhimanyu Bhandankar
Holds an MBA from Schulich School of Business and a BE in IT. He joined Droplet Lab in July 2019 and now leads sales and marketing.
CEO at Droplet Lab
Read More
Gurdeep-Saini-Photo
Technical Review by
Gurdeep Singh Saini
Holds a BASc in Mechanical Engineering from Ryerson University (now Toronto Metropolitan University) and an MASc from York University. He develops the automatic edge and baseline detection behind the Dropometer's analysis.
COO at Droplet Lab
Read More
Abhimanyu Photo
Written By

Abhimanyu Bhandankar

CEO at Droplet Lab

Holds an MBA from Schulich School of Business and a BE in IT. He joined Droplet Lab in July 2019 and now leads sales and marketing.

Gurdeep-Saini-Photo
Reviewed By

Gurdeep Singh Saini

COO at Droplet Lab

Holds a BASc in Mechanical Engineering from Ryerson University (now Toronto Metropolitan University) and an MASc from York University. He develops the automatic edge and baseline detection behind the Dropometer's analysis.

The short answer

For production QC, the SITA clean line ST inline tensiometer is our pick where a bath runs all day: it monitors surface tension continuously and talks to the plant control system. It is quote only. The Dropometer pendant drop tensiometer (US$4,990) is the runner up for batch release at the lab bench.

We make the Dropometer. It wins on accuracy, sample size and price. It loses on speed: each drop is placed by hand, and it does not read millisecond surface ages. Read our agrochemical formulation case study and our surface tension measurement guide.

The ranking

An inline monitor, a pendant drop kit and a portable bubble pressure tester, one instrument per maker, ranked for QC.

Pick by situation

  • If a cleaning, plating or developer bath runs continuously: SITA clean line ST. Inline readings with PROFINET or EtherNet/IP.
  • If you release batches at the bench and also check interfacial tension or wetting: Dropometer. US$4,990 with a published accuracy.
  • If operators test baths on the floor: KRÜSS BPT Mobile. A battery bubble pressure tester.

Also checked and not ranked: SITA's DynoTester+ is a 270 g bubble pressure tester with limits and alarms, quote only, with no accuracy published; we rank one instrument per maker, and the clean line ST is the SITA pick. The KRÜSS K20 is a semi-automatic force tensiometer for QC labs, quote only, with no dosing unit listed. No maker we checked sells a tensiometer made for agrochemical QC; labs use the same bench instruments.

SITA clean line ST

Top pick

SITA clean line ST

Not published (quote only) · checked 25 October 2026 · SITA clean line ST page

3.77/ 5

The clean line ST sits on the process and measures surface tension by bubble pressure without an operator. It wins on continuous monitoring and plant connection. It loses on cost and scope.

Where it wins

  • Continuous inline readings; can dose active agents when linked to plant control
  • PROFINET or EtherNet/IP output
  • Surface age 15 to 30,000 ms
  • Made for cleaning baths, TMAH developer and plating wetting agents

Where it loses ground

  • Quote only; a 24.5 kg installed system
  • Surface tension only
  • Reproducibility 0.5 mN/m; no accuracy figure
  • One bath per unit
Dropometer pendant drop tensiometer: smartphone on a stage beside a pendant drop at a needle tip

Runner up

Dropometer

US$4,990 list price, base kit · checked 25 October 2026 · Droplet Lab quote configurator

3.71/ 5

The Dropometer pendant drop tensiometer gives the most accurate reading on this page from a few microlitres, at a published price. It ranks second because each drop is placed by hand and it reads equilibrium rather than millisecond surface tension.

Where it wins

  • Surface tension accuracy ±0.03 mN/m on its datasheet
  • Interfacial tension and contact angle on the same kit, so you can check ink and substrate
  • A few microlitres per reading
  • US$4,990, the only published price here
  • Battery up to 8 hours; sets up in about 2 minutes

Where it loses ground

  • Drop placed by hand in the base kit, automatic dropper optional; slower per reading than bubble pressure
  • No millisecond surface ages
  • No plant control link; results export as CSV
  • Range up to 75 mN/m
KRÜSS BPT Mobile

Third

KRÜSS BPT Mobile

Not published (quote only) · checked 25 October 2026 · KRÜSS BPT Mobile data

3.53/ 5

The BPT Mobile is a battery bubble pressure tester for baths on the floor. It wins on speed and portability. It loses on sample volume and scope.

Where it wins

  • Surface age 10 to 30,000 ms
  • 600 g with a 10 hour battery
  • Precision 0.5 mN/m
  • Made for cleaning, plating and etching baths

Where it loses ground

  • Quote only
  • Minimum sample 15 mL
  • Surface tension only
  • No plant control link listed

How we arrived at these scores

Each option is scored from 1 to 5 on the same 9 criteria. A 3 means it meets what a QC team checking inks, coatings, cleaning baths or agrochemical formulations needs; a 5 means it exceeds it. Weights reflect checks during production and add to 100 percent. Multiply each score by its weight, add the rows and divide by 100: that is the headline score.

Weighted scorecard
CriterionWhat it measuresWeight (%)SITA clean line STDropometerKRÜSS BPT MobileWhy these scores
Speed per readingTime from sample to a result an operator can act on535Bubble pressure gives a reading in seconds, and the inline unit reads continuously. The Dropometer forms and fits a drop for each reading, by hand or with the optional automatic dropper.
Reading at the bath or lineMeasuring where the liquid is, without carrying samples to a lab534.5Clean line ST is installed in the process. BPT Mobile (600 g) is carried to the bath. The Dropometer is a 1 kg tabletop kit.
Plant integrationAlarms, limits and links to plant control522.5Clean line ST outputs PROFINET or EtherNet/IP and can dose. The Dropometer exports CSV.
Published accuracyAccuracy or precision stated by the maker353Dropometer: ±0.03 mN/m on its datasheet. KRÜSS: precision 0.5 mN/m. SITA: reproducibility 0.5 mN/m for the clean line ST.
Surface age for fast processesReadings at the surface ages that spraying and printing create51.55Both bubble pressure units start at 10 or 15 ms. The Dropometer reads from about a second.
Measurement scopeOther measurements from the same purchase1.552Dropometer adds interfacial tension, contact angle and surface free energy. The others measure surface tension.
Sample volumeHow little liquid each reading uses352.5A pendant drop uses a few microlitres. BPT Mobile needs 15 mL; the inline unit samples the process.
Cost to buyPublished price you can budget against152Dropometer lists at US$4,990. The others are quote only; the clean line ST is an installed system.
Operator independenceThe same liquid gives the same number, and the same pass or fail call, whoever measures it544The inline unit needs no operator. Both portable instruments read automatically once the sample is loaded.
Weighted total / 53.773.713.53

Side-by-side specification comparison

The specifications that decide a production QC purchase, from each maker's own pages and data sheets. Checked 25 October 2026.

SpecificationSITA clean line STDropometerKRÜSS BPT Mobile
PriceQuote onlyUS$4,990 base kitQuote only
FormatInline, 24.5 kgTabletop kit, 1 kgPortable, 600 g
MethodBubble pressurePendant dropBubble pressure
Surface age15 to 30,000 msFrom about a second10 to 30,000 ms
Range10 to 100 mN/mUp to 75 mN/m10 to 100 mN/m
Accuracy or precisionReproducibility 0.5 mN/m±0.03 mN/m (datasheet)Precision 0.5 mN/m
SampleProcess liquidA few µLAt least 15 mL
Power and data24 V, PROFINET or EtherNet/IPBattery up to 8 h; CSV exportBattery 10 h

Verified on 25 October 2026

Sources: SITA clean line ST, Dropometer product page, KRÜSS BPT Mobile data sheet. All checked 25 October 2026. When not to buy a Dropometer

Expert perspective

Not all contact-angle measurements are created equal: the right method depends on the application. A sessile drop and a tilted plate can give very different, and equally correct, numbers.

Dr. Alidad AmirfazliCo-founder and Scientific Advisor, Droplet Lab, Professor of Mechanical Engineering, York University

Frequently Asked Questions

Which tensiometer is best for cleaning and plating baths?

A bubble pressure tensiometer, portable or inline. It reads in seconds, at the surface ages where surfactants act, and SITA and KRÜSS both list these baths as applications.

Why does surface age matter for inks and sprays?

A jet or spray creates new surface in milliseconds, before surfactants have reached it, so the surface tension that matters is the dynamic value. Bubble pressure measures it; drop shape analysis reads the settled value. Our article on dynamic surface tension explains the difference, and our ASTM D3825 page covers the withdrawn bubble pressure standard.

When does a pendant drop tensiometer suit QC?

When you release batches at the bench, have little sample, or need interfacial tension or contact angle as well. Dosing technique matters: follow our droplet dosing and volume control guide.

How do I show the measurement is repeatable?

Run a Gage R&R study with your own operators and samples. Our Gage R&R calculator works it out. Zeus ran its own Gage R&R on the Dropometer for contact angle, and it passed.

Do surfactants change foam and wetting in the same way?

Not always. Surface tension at short surface ages predicts spreading; foam also depends on film stability. See our foam control use case and experiment on surfactants and surface tension.

Is there reference data I can check my instrument against?

Use a pure liquid of known surface tension, such as water, before each session. Our reference measurement dataset lists the values we measure.

What should I ask before buying?

Ask for the surface age range, the accuracy (not resolution), sample volume, data outputs and a dated quote. Customers publish with the Dropometer in formulation work, for example on fluorinated emulsion surfactants.

References

1.
SITA clean line STInline monitoring, outputs, range; checked 25 October 2026
2.
SITA DynoTester+Handheld bubble pressure; checked 25 October 2026
3.
KRÜSS BPT Mobile technical dataSurface age, sample, battery, precision; checked 25 October 2026
4.
KRÜSS K20Force tensiometer for QC; checked 25 October 2026
5.
Dropometer product page and specifications, Droplet LabPrice, range, accuracy; checked 25 October 2026
6.
Droplet Lab validation papersPeer reviewed comparisons with a KRÜSS DSA100E
7.
Agrochemical startup case study, Droplet LabSurface tension of agrochemical formulations

See it on your own samples

Book a 15-minute consult and we will look at your QC samples on a call, or configure a kit and get a price.